Well, that’s interesting…I have not been able to get the full 2560 x 1440 through HDMI. I'm wondering if there's an advantage to getting a display port adaptor as far as resolution and image display is concerned. I don't have a display port adaptor for the macair USB c yet. I set display settings - scaled resolution to 2560x1440 as shown here.

I'm experimenting by connecting my macair M1 2020 to the NEC272W via hdmi to hdmi. The pa272w has an hdmi 1.4 port, which is capable of up to 4k 24p.

Spectraview calibration requirements should have nothing to do with the hdmi signal displaying proper resolution outside of calibration software accuracy. It is still worth using today but some technical aspects are not quite current any more.Ĭan you link where you read this issue? There is no mention of it in the product manual. It’s a very nice monitor, and in the year it was introduced it was leading edge for color reproduction. It is also known that it is optimized for DisplayPort protocol since that is the recommended cable to use if you want to calibrate the internal hardware. It was not the newest model when I bought it back then, and again resolution is not the only clue that the HDMI implementation is old (color space is the other clue). Part of the answer may be in how old it is. In addition to the HDMI resolution issue being documented by the manufacturer themselves as mentioned in the other reply, I have owned the same monitor for 7 years and plugged three different Mac generations into it spanning 12 years, I own many HDMI cables, and the results are always the same: The PA272 only does 1920 x 1080 if you use an HDMI cable. (Yes, I have plugged two Macs into it, the monitor can then be configured as a KVM through the NEC MultiProfiler software so both Macs share and switch between a single keyboard and mouse.)

I avoided all problems by plugging my Macs in through DisplayPort and Mini DisplayPort, been working great for years. This problem usually comes up plugging in pro video equipment, not a Mac. If your use is pro video, the HDMI input seems to be RGB only so doesn’t work right with HDMI signals in YUV. If you use HDMI, read the SpectraView release notes for potential problems, under the heading “HDMI and video graphics adapter driver settings” If you also got the NEC SpectraView software to do calibration, it is much easier if you use DisplayPort/Mini DisplayPort. When it seems “a tad less sharp” over HDMI, what resolution is being reported in macOS and on the display hardware? If it is not 2560 x 1440, HDMI is not reaching the full resolution. If your use is casual, it doesn’t matter which one you use.

Mac displayport to hdmi